Publications

This Guideline describes common Advanced Driver Assistance Systems (ADAS) functions and their operational characteristics, including their limitations, and the conditions under which they may be allowed during on-road driver testing. The Guideline…

In 2022 Austroads encouraged drivers, employers and trainers to have their say on proposed changes to heavy vehicle driver licensing in Australia. The changes are documented in a Consultation Regulation Impact Statement (C-RIS) which sought feedback…

This test method sets out the procedure for determining the apparent viscosity of PMBs at temperatures above 100°C, using the Brookfield Thermosel rotational viscometer.

This test method applies to polymer modified binders, polymers and crumb rubber.Materials are sampled according to this protocol to ensure that correct sampling procedures are followed and that test results provide the required information on…

This test method sets out the procedure for the determination of the flash point of polymer modified binders (PMBs). This test method is applicable to PMBs used in the construction and maintenance of pavements (as specified in ATS 3110).

This test method is applicable to all binders that do not have a viscous response at 70°C and at long loading times when confined to film thicknesses in the range 0.1 to 1mm. It is applicable to all modified binders.

This test method sets out the procedure for the determination of mass change or loss on heating of a polymer modified binder (PMB) due to the effect of heat and air during rolling thin film oven (RTFO) treatment.

This method complements AS/NZS 2341.21 by setting out the handling procedures for the testing of modified binders.

This test method sets out the procedure for the determination of torsional recovery of polymer modified binders (PMBs) under specific conditions using a simple torsional recovery test apparatus. PMBs are thought to provide benefits due to their…

This report describes the proposed Strategy for implementation of Assessing Fitness to Drive for consideration by the Austroads Board. It has been developed based on the Implementation Framework endorsed by the Austroads Board in 2021, together with…