Publications

This test method sets out the procedures for the determination of consistency, consistency 6%, stiffness and elastic recovery of polymer modified binders (ARRB elastometer), under specific conditions of deformation, using the elastometer developed…

This test method defines the procedure for measuring the deflection response of road pavements using a Falling Weight Deflectometer (FWD).

This test method defines the procedure for validating the distance measurement performance of vehicles conducting road condition monitoring surveys (e.g. inertial laser profilometers, Falling Weight Deflectometers, etc.).

This test method defines the procedure for measuring the maximum deflection and curvature of road pavements using a deflectograph.

This method describes a procedure for determining the particle size, shape and contaminants of crumb rubber.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a Falling Weight Deflectometer (FWD).

This test method defines the procedures for collecting reference data and for conducting the validation and repeatability checks for deflectograph equipment.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a deflectograph.

This test method sets out the procedure for determination of the softening point of polymer modified binders.

This method describes a procedure for determining the bulk density of crumb rubber in the size range 600 to 300 µm.