Publications

This report summarises the activities undertaken as part of a project to provide contemporary intersection design guidance and achieve timely updates to Austroads Guide to Road Design Part 4, 4A, 4B and 4C based on best practice evidence to improve…

Austroads has recently completed a project to identify best-practice guidance for the design, delivery and testing of in-tunnel aesthetic design features, with the aspirations to improve tunnel safety and customer experience. Through the review of…

This report documents the changes to Section 6 &ndash

This report outlines a detailed and contemporary review of in-tunnel aesthetic features applied and tested, and how such features can be considered throughout the project lifecycle: planning, design, procurement, operation, maintenance, testing and…

This report, originally published in November 2021, outlines the findings of a project to develop clearer and more consistent tunnel signage to reduce the impact of over-dimensioned and dangerous goods vehicles on both infrastructure and Workplace…

Road tunnels are an important element of the transport infrastructure, requiring significant resources and energy to construct, operate and maintain. Consequently, they are potentially a major source of greenhouse gas emissions and environmental…

This test method sets out the procedure for determining the apparent viscosity of PMBs at temperatures above 100°C, using the Brookfield Thermosel rotational viscometer.

This test method applies to polymer modified binders, polymers and crumb rubber.Materials are sampled according to this protocol to ensure that correct sampling procedures are followed and that test results provide the required information on…

This test method sets out the procedure for the determination of the flash point of polymer modified binders (PMBs). This test method is applicable to PMBs used in the construction and maintenance of pavements (as specified in ATS 3110).

This test method is applicable to all binders that do not have a viscous response at 70°C and at long loading times when confined to film thicknesses in the range 0.1 to 1mm. It is applicable to all modified binders.