Publications

This test method sets out the procedure for the determination of the flash point of polymer modified binders (PMBs). This test method is applicable to PMBs used in the construction and maintenance of pavements (as specified in ATS 3110).

This test method is applicable to all binders that do not have a viscous response at 70°C and at long loading times when confined to film thicknesses in the range 0.1 to 1mm. It is applicable to all modified binders.

This test method sets out the procedure for the determination of mass change or loss on heating of a polymer modified binder (PMB) due to the effect of heat and air during rolling thin film oven (RTFO) treatment.

This method complements AS/NZS 2341.21 by setting out the handling procedures for the testing of modified binders.

This test method sets out the procedure for the determination of torsional recovery of polymer modified binders (PMBs) under specific conditions using a simple torsional recovery test apparatus. PMBs are thought to provide benefits due to their…

Asphalt pavements are a major component of the Australian and New Zealand road networks. Road agencies in Australia and New Zealand have been putting great efforts to produce pavements which perform and are long-lasting. This has led to the…

This report describes research work into the development of a new test method utilising the dynamic shear rheometer (DSR) to conduct consistency 6% at 60 

Polymer modified binders (PMBs) are prepared from mixtures of polymers, additives and bitumen selected to achieve their required properties. Some of these binder systems can segregate leading to variations in measured properties and in some…

Austroads&rsquo

This report provides advice to project managers who may not have specific technical experience in the modelling field to assist in commissioning and managing services in Simulation (Mesoscopic and Microscopic) and Intersection modelling services. It…