Publications

Austroads Technical Specification ATS 3480 sets out the requirements for the following treatments to the surface of bituminous pavements: improving the surface texture of sprayed seals by removing excess binder (&lsquo

This study investigated the relationship between cutter oil properties and sprayed seal performance so that this information could be used as a basis for updating Australian Standard 3568. AS 3568 specifies the properties of four different types of…

This report examines the viability of using recycled plastics in asphalt and sprayed seals by Australian and New Zealand road authorities. The report presents the findings of a literature review, including case studies of local and overseas road…

This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…

This report presents the results of a field validation study conducted as part of the development of a new long term ageing test for polymer modified binders used in sprayed seals in Australia. Unaged samples of binders were collected during the…

This document sets out the performance requirements expected of bitumen sprayers operating in Australia and New Zealand.

For a consistent and high quality of sprayed sealing work to be undertaken, and for sprayed sealing to remain a viable surfacing…

This webinar, presented on 8 August 2019, provides an overview of an Austroads project that developed a new sprayed seal binder cracking test and compared the performance of polymer modified binders (PMBs).

This webinar, presented on 11 July 2019, provides an overview of an Austroads project that compared the test properties of seven commercially available cutter oils with their sprayed seal performance.

The Australian polymer modified binder (PMB) specification (AGPT/T190) currently requires different binder grades to be used in sprayed sealing and asphalt applications. This study compared the sprayed seal performance of PMBs representing four AGPT/…

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…