Publications

This user guide provides guidance to road managers, planners and designers on achieving improved safety outcomes by applying consistent standards along a road corridor. Thirteen road stereotype tables were identified covering the road network from…

This report summarises activities undertaken to produce guidance on road cross-section design for road stereotypes during stage 1 and 2 of this project. The guidance enables road managers, planners and designers to achieve improved safety outcomes…

This method sets out the procedure for determining the degree of stripping of a single coat sprayed seal with a nominal aggregate size of 10 mm or larger.

This webinar, delivered on 9 April 2020, examines alcohol related road trauma and reports on the differing legislation, penalty and enforcement policies and practices in place across Australian jurisdictions. It recommends improvements in policy and…

This report provides an Australian policy and regulatory framework to encourage effective reforms to reduce and prevent drink driving and riding. The key recommendations to reduce drink driving across Australia include: extending 

Rollover crashes are an undesirable outcome in a substantial proportion of casualty crashes on high-speed roads. Rollovers are especially over-represented in run-off-road crashes due to their direct interaction with the roadside geometry. This…

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.