Publications

The test method outlines the procedure for determining the permeability of a water-saturated asphalt specimen in the laboratory using the ponding method. The test method was primarily developed for dense-graded, stone mastic and gap-graded asphalt…

The purpose of this guideline is to provide potential recyclers with the information they need to gain a better understanding of how recycled crushed glass (RCG) should be processed to make it fit-for-purpose for infrastructure applications. This…

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

This webinar provides an overview of Austroads&rsquo

This document describes the procedures to be followed for compacting asphalt specimens using a gyratory compactor.

This webinar, presented by Les Louis, Lauren Thompson and Dr Richard Yeo, informs practitioners about the updates made to Part 2 of the Guide to Road Tunnels in 2021 and the reasons for those changes. Every section of Part 2 is addressed to show…

The Guide to Road Tunnels Part 2 provides guidance to those making decisions in the planning, design, operation and maintenance of new road tunnels in Australia and New Zealand. Principles and standards identified are based on both Australasian and…

This webinar, presented by Robert Urquhart on 11 August 2020, gives an overview of an Austroads project which provided expert technical input into the update of four Australian standards which were revised by the Standards Australia Technical…

This Austroads Technical Specification ATS 2230 sets out the requirements for the supply of small precast reinforced concrete rectangular box culverts, up to 1200 mm wide and 1200 mm high, and associated link slabs. It excludes box culverts: which…

This method sets out the procedure for determining the degree of stripping of a single coat sprayed seal with a nominal aggregate size of 10 mm or larger.