Publications

This report deals with the first component of the bridge assessment tool and is a scoping study to determine whether there is sufficient data, and whether there exists suitable engineering models, to develop robust and nationally uniform technical…

This report presents the findings of a Feasibility Study, conducted by Rapp Trans on behalf of Austroads, into procedural, technical and market issues associated with potential business models to support the reform of heavy vehicle charging in…

The purpose of this project is to provide an assessment of the impacts of the most significant types of road pricing schemes on road use, the economy and community. There has been little empirical research undertaken to gain a comprehensive…

This test method describes the procedure for measuring the penetration depth of a standard steel ball into a road surface under the impact of a standard hammer.

This study reviews recent developments in road pricing for managing road travel demand and congestion, and identifies potential pricing mechanisms to facilitate freight modal choice based on marginal social costs including environmental and other…

This report provides an analysis of road pricing from a technical perspective to inform road authorities in Australia and New Zealand of some of the key issues involved. A key objective is to provide advice on what is required to identify and…

This test method sets out the procedure for determining the amount of binder drain-off likely to occur in an asphalt mix during storage and transport. The method may be used to determine the amount of binder drain-off at the maximum mixing…

This method describes the procedure for the recovery of sprayed seal samples from the pavement without disturbing the sealing aggregate orientation. The method stipulates how the void content of the sample is determined.

This test method sets out the procedure for assessing the degree of absorption of a primer or primerbinder by a given road gravel in bituminous surfacing work.

This test method details the requirements for determining the flexural stiffness, phase angle, dissipated energy per cycle, cycles to failure and cumulative dissipated energy at failure of asphalt subjected to repeated flexure by cyclical four-point…