Publications

This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining the transverse distribution of bitumen sprayers, and is based on…

This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining the transverse distribution of bitumen sprayers, and is based on…

This test method sets out the procedure for determining the accuracy of road speed indicators used on bitumen sprayers. The road speed of the bitumen sprayer is used in conjunction with the pump volumetric output to enable bituminous materials to be…

This protocol specifies the method for sampling bituminous slurry mixture from the slurry paving unit at the paving site.

This test method sets out the procedure to evaluate the wearing resistance of bituminous slurry surfacing materials under wet abrasion conditions.

This test method sets out the procedure to evaluate bituminous slurry materials for their propensity for binder flushing after subjecting to loaded wheel tracking cycles.

This test method sets out the method for the determination of the setting and curing characteristics of a bituminous slurry as a function of the cohesive strength developed in the mixture with time.

This test method sets out the procedure to determine the consistency of a bituminous slurry that is then used to optimise the amount of water required to form a workable mixture. This test may not be applicable to certain microsurfacing mixtures due…

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level automatic crack detection.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a traffic speed deflectometer (TSD).