Publications

This test method sets out the procedure for determining the amount of binder drain-off likely to occur in an asphalt mix during storage and transport. The method may be used to determine the amount of binder drain-off at the maximum mixing…

This method describes the procedure for the recovery of sprayed seal samples from the pavement without disturbing the sealing aggregate orientation. The method stipulates how the void content of the sample is determined.

This test method sets out the procedure for assessing the degree of absorption of a primer or primerbinder by a given road gravel in bituminous surfacing work.

This test method details the requirements for determining the flexural stiffness, phase angle, dissipated energy per cycle, cycles to failure and cumulative dissipated energy at failure of asphalt subjected to repeated flexure by cyclical four-point…

This method sets out recommended procedures for mixing, compacting, conditioning and trimming asphalt to provide homogeneous specimens suitable for wheel track testing, beam flexure testing, resilient modulus testing and other asphalt…

This test method sets out the procedures for determining particle loss (abrasion) from laboratory prepared specimens of open graded asphalt. The test may be performed on dry samples or after period of moisture conditioning.

This method details the determination of the binder content of asphalt mixes by ignition at a temperature of not less than 540°C and the subsequent determination of the particle size distribution by sieve analysis.

This test method sets out the calculation procedures for the determination of a Binder Film Index. The test is applicable to all types of asphalt.

Asphalt characterisation tests require equipment that is well maintained and correctly adjusted. The procedures described in this document will provide a means of verifying that a Gyropac gyratory compactor is in a suitable working condition to…

The aim of this Issues Paper is a further refinement and clarification of the ITS Workshop outcomes and so that the following is achieved: The identification of the extent and role of ITS applications and their potential impact of future road asset…