Publications

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

Guide to Pavement Technology Part 3 addresses the selection of the most appropriate pavement surfacing. The Guide identifies the significant factors that need to be considered in the selection of the most appropriate surfacing, their inter-…

Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements summarises aspects of Australian and New Zealand practice in materials for use in concrete road pavements including: base concrete and lean-mix concrete subbase concrete…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of concrete prisms containing the aggregate under investigation. This Test Method is not…

This Test Method determines the susceptibility of aggregate to an expansive reaction when mixed with cement in a concrete mix. It measures the change in length of representative mortar bars containing the aggregate under investigation during storage…

Austroads Technical Specification ATS 5820 specifies the requirements for the supply and application of anti-graffiti coating systems to structures, roadside furniture and traffic controller boxes. It excludes the application of coating systems to…

This test method determines the performance of anti-graffiti coatings and is based on Main Roads Western Australia Testing Method for Anti-Graffiti Coatings 6706-02-2238. This Test Method assesses the following properties: ease of removing graffiti…

Austroads Technical Specification ATS 5310 sets out the requirements for the supply, fabrication, handling and placement of steel used for the reinforcement of concrete (&lsquo

Austroads Technical Specification ATS 5390 sets out the requirements for the cathodic protection (CP) of steel in atmospherically exposed, buried and submerged concrete. It covers both new and existing structures and includes: assessment of existing…

Austroads Technical Specification ATS 5350 sets out the requirements for the supply of materials and application of waterproofing membrane systems on new or existing concrete bridge decks. It does not cover waterproofing membrane systems for use on…