Publications

This webinar, presented by Dr Bruce Corben on 26 March 2020, demonstrates ways to integrate Safe System design and operation with Movement and Place for vulnerable road users, in particular pedestrians and cyclists. The Movement and Place Framework…

Austroads Technical Specification 5340 sets out the requirements for the patch repair of defective concrete using cementitious materials. The process of restoring existing concrete typically includes: breaking back to sound and dense concrete to…

This Austroads Technical Specification ATS 2210 sets out the requirements for the supply and delivery of steel reinforced precast concrete pipes used for stormwater / drainage purposes. It excludes: concrete pipes subject to internal pressure…

This webinar, presented on 15 October 2019, provides an overview of an Austroads project that investigated whether cements with elevated limestone content would perform satisfactorily in ambient-cured and precast concretes subjected to aggressive…

This report presents the results of a research project commissioned by Austroads to investigate whether the currently used Australian general-purpose (GP) cement which complies with AS 3972, and which may contain up to 7.5% limestone as a mineral…

This webinar, presented on 4 July 2019, provides an overview of the 2018 edition of the Austroads Guide to Asset Management.

The use of stabilisation technology for stabilising and recycling materials for pavement construction and maintenance is widely accepted as a cost-effective method of improving long‑term performance and reducing whole-of-life costs of modern,…

This webinar, presented on 11 April 2019, gives an overview of the key changes to the Guide and the significant advances in the areas of stabilisation or road pavements.

This webinar, presented on 27 November 2018, provides an overview of a framework to help assess the value of maintenance and renewal works, consistent with capital investments.

This test method describes the methods for the determination of the flexural modulus, strength and fatigue characteristics of laboratory‑manufactured cemented materials using four point bending techniques.