Publications

Filter
Topic
Publication State
Showing 11 - 20 of 124 Publications
Assessing fitness to drive for commercial and private vehicle drivers
Driving a motor vehicle is a complex task involving perception, appropriate judgement, adequate response time and appropriate physical capability. A range of medical conditions, disabilities and treatments may influence these driving prerequisites.…
Technical Basis of Austroads Guide to Pavement Technology Part 4E: Recycled Materials
The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…
Webinar: Increasing the Use of Recycled Glass in Road Infrastructure
This webinar, presented by Dr James Grenfell and Dr Didier Bodin, focuses on the development of a specification on the supply of recycled crushed glass sand as part of a project to support increased use of recycled crushed glass (RCG) in road…
Crushing, Processing and Cleaning of Recycled Crushed Glass for Transport Infrastructure
The purpose of this guideline is to provide potential recyclers with the information they need to gain a better understanding of how recycled crushed glass (RCG) should be processed to make it fit-for-purpose for infrastructure applications. This…
Development of a Specification for Recycled Crushed Glass as a Sand Aggregate Replacement
This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…
Guide to Road Design Part 1: Objectives of Road Design
Guide to Road Design Part 1 provides practitioners with a detailed description of the critical aspects of road design.
Webinar: An Overview of the New Guide to Road Design Parts 1 and 7
Austroads has recently completed a project to consolidate the previous Guide to Road Design Part 1: Introduction to Road Design, Part 2: Design Considerations and Part 8: Process and Documentation into a new Part 1: Objectives of Road Design. This…
Guide to Pavement Technology Part 3: Pavement Surfacings
Guide to Pavement Technology Part 3 addresses the selection of the most appropriate pavement surfacing. The Guide identifies the significant factors that need to be considered in the selection of the most appropriate surfacing, their inter-…
Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements
Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements summarises aspects of Australian and New Zealand practice in materials for use in concrete road pavements including: base concrete and lean-mix concrete subbase concrete…
Webinar: Pedestrian Planning and Design for Residential Areas
This webinar, presented by Ann-Marie Head and Jeanette Ward, focuses on the planning and design considerations for walkable residential neighbourhoods, both new and existing, and where to find that guidance in Austroads&rsquo