Publications

Crumb rubber binders have been used to construct sprayed seals in Australia for many decades but have not been utilised in asphalt in the past. Due to the lack of crumb rubber binder grades in the Australian national polymer modified binder (PMB)…

The ban on the export of recycled waste plastic by the Australian government has led to interest in the use of recycled waste plastic in road surfacing applications. Austroads has published a report, Interim guidelines for the use of recycled waste…

As a result of the ban on the export of recycled waste plastic, there is increasing interest in repurposing recycled waste plastic for use in road surfacing applications. There is no guide for this purpose and until such time as a guide is available…

Guide to Pavement Technology Part 3 addresses the selection of the most appropriate pavement surfacing. The Guide identifies the significant factors that need to be considered in the selection of the most appropriate surfacing, their inter-…

Guide to Pavement Technology Part 4C: Materials for Concrete Road Pavements summarises aspects of Australian and New Zealand practice in materials for use in concrete road pavements including: base concrete and lean-mix concrete subbase concrete…

This report provides a comprehensive overview of the type, volume, and price of recycled plastics and their possible uses in asphalt. The report presents data, including recycling processes, prices of recycled plastics, annual production volumes and…

Austroads Technical Specification ATS 5310 sets out the requirements for the supply, fabrication, handling and placement of steel used for the reinforcement of concrete (&lsquo

Austroads Technical Specification ATS 5350 sets out the requirements for the supply of materials and application of waterproofing membrane systems on new or existing concrete bridge decks. It does not cover waterproofing membrane systems for use on…

Austroads Technical Specification ATS 5390 sets out the requirements for the cathodic protection (CP) of steel in atmospherically exposed, buried and submerged concrete. It covers both new and existing structures and includes: assessment of existing…

This Austroads Technical Specification ATS 2230 sets out the requirements for the supply of small precast reinforced concrete rectangular box culverts, up to 1200 mm wide and 1200 mm high, and associated link slabs. It excludes box culverts: which…