Publications

Filter
Topic
Publication State
Showing 41 - 50 of 113 Publications
Fire Incident and Fire Safety Operational Data for Major Australian Road Tunnels
This report sets out the process though which fire incident and fire safety operational information was collected for eleven major road tunnels in Australia. This tunnel data set are the major tunnels in Australia as defined by physical…
Webinar: Suggested Good Practice for Road Tunnel Emergency Egress Signage
This webinar, presented on 9 November 2018, provides an overview of an Austroads study to develop suggested good practice for a consistent, efficient and safe approach to emergency egress signage within Australasian road tunnels.
Suggested Good Practice for Road Tunnel Emergency Egress Signage
This report provides guidance on consistent, efficient and safe design of emergency egress signage and operations in road tunnels. While there are Australian Standards relating to emergency egress signage, these were not originally intended for use…
Guide to Road Tunnels Part 3: Operations and Maintenance
Guide to Road Tunnels Part 3 provides guidance on the management of the operation and maintenance aspects of road tunnels, including the factors to be considered in setting appropriate performance standards. Guidance is provided on stakeholder…
Webinar: Geopolymer Concrete and its Applications
This webinar, presented on 1 May 2018, outlines the findings of an Austroads geopolymer concrete project and a current update of the use, monitoring and specification of geopolymer concrete by VicRoads over the past nine years. The webinar was…
Guidelines: National Prequalification System for Precast Concrete Products
This new National Prequalification System (NPS) documentation is made available to road agencies and industry to enable the new specialist category for precast concrete to be formally introduced into the NPS.
Specification and Use of Geopolymer Concrete in the Manufacture of Structural and Non-Structural Components: Experimental Work

This report details the experimental phase of an Austroads project to review the specifications and use of geopolymer concrete. The findings indicate that acceptable grades of structural geopolymer concrete can be made for field applications.

This…

The Challenges Faced in Assessing the Durability Risks of Reinforced Concrete Bridges in Aggressive Environments
Durability assessment is increasingly becoming an integral part of infrastructure design projects in Australia. One of the key drivers for this is the requirement by asset owners for optimum whole of life cost, minimum construction period and…
The Torsional Strengthening of Concrete Girders Using the NSM FRP Technique with Different Configurations
The near-surface mounted (NSM) FRP technique has received attention worldwide over the externally bonded FRP strengthening technique. Strengthening of a concrete girders using fiber reinforced polymer (FRP) composites to flexural and shear…
Bridge Design Challenges on the Waikato Expressway Huntly Section, New Zealand
The Huntly Section is a new NZ$415M section of the Waikato Expressway running between Hamilton and Auckland. It will connect the recently completed Ngaruawahia and Ohinewai sections on a route that traverses the Taupiri Ranges within a deep cutting…