Publications

This test method is for bitumen sprayers as specified in AGPT/T530 Calibration of bitumen sprayers: general introduction and list of methods. It sets out the procedures for determining the transverse distribution of bitumen sprayers, and is based on…

This test method sets out the procedure for determining the accuracy of road speed indicators used on bitumen sprayers. The road speed of the bitumen sprayer is used in conjunction with the pump volumetric output to enable bituminous materials to be…

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level automatic crack detection.

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement deflection testing using a traffic speed deflectometer (TSD).

This specification provides minimum equipment, calibration, validation and survey method requirements for the conduct of network level pavement roughness measurement using an inertial profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement surface texture determined using a laser profilometer.

This test method defines the procedure for measuring the surface macro-texture of road pavements, determined by the direct measurement of the road surface profile using a laser profilometer.

This test method defines the procedure for conducting repeatability and bias of measurement checks for rut measurements made by a laser profilometer.

This test method defines the procedure for performing validation checks of the measurements of pavement rutting determined using a laser profilometer, by comparing them to the measurements from a static or manual reference device.