Publications

Some recent problems with polymer modified binder (PMB) seals have been attributed to lack of initial adhesion of the binder to the sealing aggregate. This suggests that higher levels of cutter than those given in an Austroads Guide may be necessary.…

This report documents the surface life prediction models that have evolved from the long term sampling of the bitumen in sprayed seals and thin asphalt surfaces. The estimation of surface life is predicated on the basis of the mechanism of bitumen…

This project forms part of an ongoing Austroads strategic research program to improve the understanding of the relationship between crash risk and road elements. This report provides a summary of the relationship between crash risk, and geometric…

A road trial was established at Gisborne on the Calder Highway. The aim of the trial was to review the performance of sprayed seals constructed from a number of binder types. Class 170 is typically used in Victoria for sprayed seals and a section…

This report presents an extensive literature review of pavement surface texture measurement methods with a specific interest in how they affect operator safety and delays to traffic. The literature review shows that there are a number of methods in…

In 1993, Austroads performed an extensive trial of foamed bitumen sprayed sealing in Australia, as a part of environmental and energy effective sealing technology development program. The trials were conducted in various states and reported to be…

A review of bleeding or flushed seals was undertaken to determine what physical changes had taken place within the seal that had resulted in the binder lying at or close to the surface. The evaluation process used a visual appraisal and a digital…

Improved RD models for sealed granular and asphalt pavements are needed. Pavement performance history data from state road authorities and New Zealand (SRAs) were used for calibrating RD models. The calibration and refinement of RD models is…

This report is an update of earlier Austroads sprayed seal design procedures based on the philosophy of filling voids in the aggregate matrix with binder to a depth of about one half to two thirds the height of the aggregate when laying on its least…

Austroads has produced a series of test methods developed from various technical projects, principally in the bituminous materials area (asphalt, binders, slurry and sprayed seals). The Austroads system of managing the test methods has enabled…