Publications

Part 4J of the Guide to Pavement Technology provides information and guidance on: the classification and description of source rocks

This report details the construction of two test pavements which were used for an assessment of fatigue performance of cemented materials under full scale, rolling wheel, accelerated pavement testing (APT). The test pavement consisted of a sand…

This report presents the results of testing conducted on an unbound granular pavement with a thin bituminous surfacing using a variety of tyre types and half-axle loads applied using the Accelerated Loading Facility. It was found that the reference…

Improved RD models for sealed granular and asphalt pavements are needed. Pavement performance history data from state road authorities and New Zealand (SRAs) were used for calibrating RD models. The calibration and refinement of RD models is…

Over the last decade a considerable amount of research effort has been focussed on the development of a repeated load triaxial (RLT) test procedure to assist practitioners in the use of natural and marginal unbound base/subbase materials in road…

The selection of pavement materials is a critical element in the design, construction and maintenance of pavements if performance is to be optimised and whole of life costs minimised. This part of the Austroads Guide to Pavement Technology provides…

The objective of this report is to provide data relating the laboratory repeated load triaxial test (RLT) results to field performance and to develop procedures for incorporation of RLT test results into performance-based specifications and…

This Pavement Work Tip provides a guide to the sprayed seal technique commonly referred to as skin patching which is used for minor repairs of road pavements.

This guide presents information on the application, design, maintenance and recycling of geotextile reinforced seals. The main application is as a surfacing treatment though there is some discussion of use as an interlayer. Two grades of fabric are…

This Pavement Work Tip provides a guide to retexturing bituminous surfaces by using high pressure water to remove excess bitumen.