Publications

Filter
Topic
Publication State
Showing 41 - 50 of 54 Publications
Relative Pavement Wear of an Unbound Granular Pavement due to Dual Tyres and Single Tyres
This report presents the results of testing conducted on an unbound granular pavement with a thin bituminous surfacing using a variety of tyre types and half-axle loads applied using the Accelerated Loading Facility. It was found that the reference…
Development of HDM-4 Road Deterioration (RD) Model Calibrations for Sealed Granular and Asphalt Roads

Improved RD models for sealed granular and asphalt pavements are needed. Pavement performance history data from state road authorities and New Zealand (SRAs) were used for calibrating RD models. The calibration and refinement of RD models is…

Optimum Use of Granular Bases: Construction of Test Pavements

Over the last decade a considerable amount of research effort has been focussed on the development of a repeated load triaxial (RLT) test procedure to assist practitioners in the use of natural and marginal unbound base/subbase materials in road…

Guideline for Freight Routes in Urban and Rural Areas
This report provides a practical and comprehensive representation, in the form of case studies, which outline successful approaches to the identification and planning of road freight routes in urban and rural areas by a number of state jurisdictions.…
Optimum Use of Granular Bases: Material Selection for Detailed Performance Evaluation
The objective of this report is to provide data relating the laboratory repeated load triaxial test (RLT) results to field performance and to develop procedures for incorporation of RLT test results into performance-based specifications and…
Road Safety in Rural and Remotes areas of Australia
Annually across Australia about 1,000 people are killed on roads in rural and remote areas, while approximately a further 26,000 people are injured. Those found to be at most risk are young male drivers, truck drivers, pedestrians and those living…
Development of Performance-Based Specifications for Unbound Granular Materials: Part A: Issues and Recommendations
The Austroads Member Authorities (AMAs) are developing a Performance Based Specification (PBS) approach to the specification of unbound granular materials in Australia and New Zealand. There has been general agreement to adopt the engineering…
Development of Performance-based Specifications for Unbound Granular Materials Part B: Use of RLT Test to Predict Performance
The Austroads Member Authorities (AMAs) are developing a Performance Based Specification (PBS) approach to the specification of unbound granular materials in Australia and New Zealand. There has been general agreement to adopt the engineering…
Pavement Strength in Network Analysis of Sealed Granular Roads: Basis for Austroads Guidelines
This technical report resulted from a study to develop Austroads guidelines on network level assessment and analysis of data on pavement structural condition. This report outlines the benefits of network level assessment of the structural condition,…
Dust Laying with Bitumen Emulsions
This Pavement Work Tip describes the use of bitumen emulsion for dust laying on unsealed granular pavements to reduce dust nuisance, maintenance costs and loss of pavement material.