Publications

This report discusses infrastructure and traffic management issues identified in an examination of approximately 700 crash investigations conducted in metropolitan and rural areas of South Australia. Current traffic management and engineering…

Recognising the importance to pavement designers, asset managers and policy makers of an improved understanding of the relationship between different multiple axle group loads (single, tandem, triaxles, etc.) and road pavement performance, Austroads…

Part 6 of the Guide to Pavement Technology addresses unsealed pavements including operational demands of unsealed road surfaces, pavement configurations, floodways, cuts, fills and mine haul roads, the identification of suitable pavement materials…

Part 10: Subsurface Drainage provides advice on the general requirements for drainage materials, design of pavement drains and construction and maintenance considerations. This Part contains information on the types and uses of subsurface drainage…

This report details the construction of two test pavements which were used for an assessment of fatigue performance of cemented materials under full scale, rolling wheel, accelerated pavement testing (APT). The test pavement consisted of a sand…

The selection of pavement materials is a critical element in the design, construction and maintenance of pavements if performance is to be optimised and whole of life costs minimised. This part of the Austroads Guide to Pavement Technology provides…

This Pavement Work Tip provides a guide to the sprayed seal technique commonly referred to as skin patching which is used for minor repairs of road pavements.

This guide presents information on the application, design, maintenance and recycling of geotextile reinforced seals. The main application is as a surfacing treatment though there is some discussion of use as an interlayer. Two grades of fabric are…

This project has been funded by Austroads to develop, trial and evaluate a new system for setting speed limits based on harm reduction principles. This first, feasibility stage of the project has consisted of three main tasks: a literature review…

This Pavement Work Tip provides a guide to retexturing bituminous surfaces by using high pressure water to remove excess bitumen.