Publications

This report summarises work conducted to establish a compaction procedure for the Austroads asphalt mix design process. Part of the early work examined overseas research and this is briefly summarised to provide supporting evidence as to the…

The Austroads asphalt mix design method was developed in 1997 and has had a number of revisions over the intervening years as test methods evolve and experience is gained. However, implementation of the method has been variable across the various…

This report summarises some of the literature dealing with the compaction of dense graded asphalt. Compaction of asphalt is usually expressed in terms of air void content. This is necessary as the aggregate which constitutes about 95% of the mass of…

The development of an Austroads asphalt mix design procedure led to adaptation and adoption of a number of overseas test methods. These test methods were then compiled into what has become a suite of Austroads test methods. The Austroads test…

This report presents a testing plan to examine the effect that multiple axle group loads (e.g. tandem, triaxles, etc.) have on the flexural fatigue performance of asphalt, and forms a component of long term Austroads project work. The testing plan…

This Pavement Work Tip provides a guide to equipment, site selection, safety and procedures for coring of asphalt pavements.

This Pavement Work Tip provides a guide to the use of nuclear gauges to determine the density of asphalt pavements.

The Austroads Guide to the Selection and Design of Asphalt Mixes does not address the design of mixes containing Recycled Asphalt Pavement (RAP). The report contains the additions and amendments which should be made to the next revision of the Guide…

A new, performance related asphalt mix design procedure was developed to address increased traffic stressing of pavements and to evaluate new mix types and new binder formulations. A series of Workshops was held in the capital cities of Australia…