Publications

This report describes research into the development of a draft Austroads evaluation protocol for rejuvenators. Rejuvenators are typically used to produce asphalt mixes containing high levels of reclaimed asphalt pavement (RAP). The report includes a…

This report, originally published in November 2021, outlines the findings of a project to develop clearer and more consistent tunnel signage to reduce the impact of over-dimensioned and dangerous goods vehicles on both infrastructure and Workplace…

The purpose of this literature review is to assess the current body of research for the incorporation of recycled material in pavements to inform updated guidance to the current Austroads Guide to Pavement Technology Part 4E: Recycled Materials. New…

This report documents a project undertaken to investigate the issues associated with managing the planning, construction, operation and maintenance of road tunnels in a sustainable manner. The results of the investigation informed an update to all…

This report presents the findings of a project that evaluates the fatigue performance of foamed bitumen stabilised (FBS) pavements under accelerated loading. Using accelerated pavement testing, the project evaluated three FBS host materials (100%…

This report presents the technical basis for the development of the Austroads technical specification and guideline for the use of recycled glass in bedding, backfilling material, concrete, road drainage, embankment fill, and landscaping…

This report has been prepared by the Austroads Emulsion Project to provide general information on the use and application of bitumen emulsions in Australia and New Zealand. The information contained herein has been compiled from surveys and project…

The report describes the work undertaken in the first year of a two-year project to assist implementation of a new Australian asphalt mix design procedure. The main tasks undertaken were (i) preparation of an update for the Australian Provisional…

This framework for specifying asphalt has been prepared by Austroads and the Australian Asphalt Pavement Association, with input from the New Zealand Pavement and Bitumen Contractors Association (BCA) to promote national uniformity and good practice…

This technical document presents the validation/calibration of the dynamic load response models and provides detailed comparisons between the predicted dynamic responses from the models (linear and non-linear) with the measured wheel force data that…